1ptrans.gif (44 bytes)

Home  |  Support |  Search  |   Productsa
1ptrans.gif (44 bytes)
bullet.gif (881 bytes) Products

bullet.gif (881 bytes) Resources

bullet.gif (881 bytes) Software

bullet.gif (881 bytes) Contacting us

bullet.gif (881 bytes) What's New

 1ptrans.gif (44 bytes)
CID1500 & AI-7280 Restrictions

Return to CID1500 Page

Due to hardware differences between the older TSPC PC plug in card and the AI-7280, some features of the CID1500 software are not available when using the AI-7280 Central Office Line Simulator.   The restrictions are as follows:

General:
Digital output A or B can not be set active during either FSK, ringing, or open switching intervals (OSI).  

Scripting:
Set Output A FSK, Set Output B Ring, and Set Output B OSI are not supported.
NetTone command is not supported.
BranchIf (NetTone, notNetTone) command is not supported.
If (NetTone, notNetTone) command is not supported.
If (InputA, InputB) command is not supported if the software version is 2.71d or earlier.

 
Copyright © Advent Instruments Inc. All rights reserved.
Last modified: 05-01-2007